Liqui Moly Underseal Black 1L - 6114

Stoneguard coating based on rubber and resins. Is distinguished by fast drying and ability to be painted over, provides abrasion-resistant corrosion protection, offers excellent protection against stone chipping and has sound-absorbing properties. After drying completely, a permanently elastic film remains. Can be painted over using commercially available paint systems and is easy to grind after drying.

AREAS OF APPLICATION

• For the coating of bare and painted surfaces, predominantly for vehicle underbodies and repairing or supplementing existing PVC or rubber/resin-based coatings
• Is mainly used for after treatment or repair work on areas of vehicle underbodies which are difficult to access (such as angles, corners, edges etc) in which rust tends to form

APPLICATION

• Clean the surfaces to be treated thoroughly in advance and remove rust
• The surfaces must be dry and free of wax, dirt and grease and largely free of dust
• Shake well before use! The adhesion is improved if the surface to be treated is roughened first
• Can be applied with the UBS Spray Gun (part no. 6219) or the Compressed Air Can Gun (part no. 6220) at an operating pressure of 2 – 4 bar depending on the desired spray pattern
• Can be painted over after approx. 60 – 90 min - (depending on film thickness, temperature and humidity)
• Most of the usual water and solvent-based 2C paints and base coats can be used here
• When using a 2C paint, we recommend using a coat of plastic primer first and painting over this coat after it is completely dry, as recommended by most paint manufacturers
• Recommended application temperature: 15 – 25 °C
  We recommend applying thin coats
• Depending on the desired layer thickness, intermediate drying should be carried out after each layer
• If the stoneguard is subsequently painted over, the coats will become increasingly hard
• In other words, the treated surface should be treated accordingly with adhesive primer for plastics in the same way a plastic surface would be
• Do not leave containers standing open as a skin will form on the surface of the material

PEAK PERFORMANCE. MAXIMUM PROTECTION

• can be painted over
• OEM quality
• Colour: black

ADDITIONAL INFORMATION

• Stoneguard coating based on rubber and resins
• Results in an abrasion-resistant corrosion protection, provides optimum protection against stone chipping and has sound-absorbing properties
• Recommended application temperature: 15 – 25 °CDo not spray onto moving parts and hot components such as mechanical joints, the engine, gearbox, cardan shaft, exhaust pipe, catalytic converter and brake systems
• Shake well before use! A clogged spray gun can cause the can to burst! Note the operating instructions for the spray gun! After use, clean the spray gun using the cleaner intended for the purpose

PROPERTIES

• Very good adhesion on various substrates
• Very good resistance to weathering
• Salt spray and abraded material
• Good stoneguard properties

TECHNICAL DATA