Description
LM 51 is a high-performance dry-lubricant film which is anchored fast due to the chemical reaction with the surface of the MoS2 lubricant film. The product is used for treating iron and steel (not high-alloy steel). LM 51 is made up of two components which are mixed together before use.
AREAS OF APPLICATION
- Used as a pre-treatment for difficult cold-form processes
- Used for the manufacture of lead-in layers in bearings, pistons, screws and nuts etc
APPLICATION
- LM 51 is made up of two components which are mixed together shortly before use
- The mixture must also be stirred at regular intervals to make sure that the MoS2 is uniformly distributed in the mixture
- LM 51 can be applied by immersion, spraying or brush
- For immersion, the treatment time should be between 5 and 20 minutes at a treatment temperature of around 60 °C
- LM 51 can also be used at room temperature
- In this case, the immersion time should be 30 minutes
- Thinner coats can also be produced
- After the film has dried, a thin film of LM 48 Spray Paste or a corrosion inhibitor oil such as LCP 55 can be applied for long-term protection
PROPERTIES
- Outstanding emergency-running properties
- Very low solvent content
- Cures at room temperature
- Resistant to oil
- Solvent and water
- Outstanding protection against wear
- Even under high loads
TECHNICAL DATA
| Density | 0.0 |
| Net weight (kg) | 1.0 |
| Gross weight (kg) | 1.175 |
| Container contents | 1 kg |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.