Liqui Moly Engine Preserver 300ml - 1420

Long-term protection against rust and corrosion. High operational reliability, easy handling. Compatible with all motor oils.

AREAS OF APPLICATION

• For the long-term protection of all 2 and 4-stroke gasoline and diesel engines such as passenger vehicle, truck and boat engines and motorbikes, lawnmowers, snow-clearance equipment, emergency power units, pumps, etc

APPLICATION

• Preservation is carried out via the carburetor, sparking-plug hole, injection nozzle or glow plug, depending on the type of engine
• 2-stroke engine
• Remove the air filter
• With the engine running at low revs, spray Engine Internal Preservative into the carburetor for 10 – 20 seconds, switch off the engine and remove the spark plugs
• Spray Engine Internal Preservative into the cylinder for about 5 – 10 seconds, depending on the size of the cylinder, and turn the engine by hand
• 4-stroke engine
• Remove spark plugs, injection nozzles or glow plugs and spray Engine Internal Preservative into the cylinder for 5 – 10 seconds (depending on the size of cylinder)
• Turn the engine by hand or via the starter and reinstall the spark plugs, injection nozzles or glow plugs

PEAK PERFORMANCE. MAXIMUM PROTECTION

• Long-term protection against rust and corrosion.

ADDITIONAL INFORMATION

• For preserving all 2- and 4- stroke engines before laying up
• Application: Remove sparking plugs, injectors or glow plugs depending on the type of engine (petrol or Diesel) and spray into each cylinder for 5-10 s (depending on the cylinder size)
• Then turn the engine by hand or by using the starter and reassemble the vehicle or unit
• Supplementary use for 2-stroke engines is described in the product information!

PROPERTIES

• Long-term corrosion protection
• Miscible with all commercially available motor oils
• High spreading rate
• Simple to use

TECHNICAL DATA