Liqui Moly Diesel Flow FIT K 1L - 5131

Combination of different high-molecular, ash-free additives. Controls the cold-dependent growth of paraffin crystals. Significantly improves the filtration properties and setting point of diesel fuel in cold weather. The effectiveness of the flow improver is dependent on the type of paraffin and the paraffin content of the medium distillates. Improves the cold filter plugging point (CFPP) by up to –10 °C, depending on diesel fuel quality.

AREAS OF APPLICATION

• For all diesel engines with and without diesel particulate filter or SCR system as well as all diesel fuel grades and fuel oil
• To secure winter operation in passenger and commercial vehicle diesel engines as well as in buses, construction machinery and stationary diesel engines
• Tested for compatibility with turbochargers

APPLICATION

• For optimum effect in preventing paraffin separation, it must be approx
• 5 °C above the cloud point (turbidity point)
• Clusters of paraffin crystals which have already formed cannot be broken up by subsequent addition
• 1 l sufficient for 1,000 l of fuel (dosage 1:1000)
• Note:Shake can well before use or stir up large container
• Store free of frost, where possible
• Bring up to room temperature after being affected by frost
• Vehicle tanks:Add before refueling
• Stationary fueling systems: The following mixing methods have proven successful: 1
• Add when tank is approx
• ¼ full
• Topping up the tank will provide sufficient mixing
• 2
• During subsequent additions to the tank, mix using a stirrer

PEAK PERFORMANCE. MAXIMUM PROTECTION

• Fights gelling of fuel oil and diesel fuel down to –31 ° C.*

ADDITIONAL INFORMATION

• Diesel Flow Fit K increases the flow and filtering properties of fuel oil and Diesel fuel
• Dosage: 1:1000, 100 ml of product will adequately treat 100 l of diesel fuel
• Application: The best results are obtained by adding the product prior to filling up
• Diesel Flow Fit K is only effective when it is added before the Diesel fuel or fuel oil starts to gel
• Frost sensitive; therefore store above 0 °C
• * Depending on the quality of the Diesel fuel

PROPERTIES

• Improves filter properties
• Good response behavior
• Secures winter operation which would otherwise be affected by the cold
• Self mixing
• Suitable for all diesel fuels (summer and winter diesel grades according to din en 590) and fuel oil
• Simple to use

TECHNICAL DATA