Liqui Moly Catalytic-System Cleaner 300ml - 8931

Protects the catalytic converter from clogging with soot. Cleans intake valves and the combustion chamber. Improves the combustion of the fuel. Clean engines reduce fuel consumption and therefore CO2 emissions. Prevents corrosion in the fuel system.

AREAS OF APPLICATION

• Suitable for all gasoline engines with a catalytic converter

APPLICATION

• Pour additive into the LIQUI MOLY Pump-Spray Bottle (part no 3316)
• Pump up the pump-spray bottle
• Establish access to the intake tract, ideally behind the turbocharger
• Please note that the access must be located immediately behind the air-flow sensor
• Start the engine and spray the additive into the intake tract at short intervals while the engine is at moderate speed (2,000-3,000 rpm)
• If the speed does not begin to fluctuate, the intervals between spraying can be lengthened
• If the speed fluctuates sharply (> 700 rpm), shorten the duration of spraying
• For fine atomization, check regularly that the pump-spray bottle has sufficient residual pressure
• LIQUI MOLY cannot offer any warranty if the product is not used as specified in the product information or if dosing systems other than those indicated here are used
• It is the responsibility of the user alone to verify the suitability of alternative dosing systems
• To ensure optimum cleaning of the fuel system, we recommend adding Catalytic-System Clean (part no 7110) to the fuel immediately after applying the additive
• This will safeguard the cleanness of the complete engine system including the exhaust gas system

PEAK PERFORMANCE. MAXIMUM PROTECTION

• Reduces emission and contamination of the whole catalytic system.

ADDITIONAL INFORMATION

• Effectively removes residues over a prolonged period in the intake area, on the valves and in the combustion area
• Lowers the emission values and the exhaust back pressure
• Extends the catalytic converter’s service life
• Reduces the contaminants in the entire catalytic system
• Application: It is added in the intake area – downstream of the air filter – using an appropriate metering device
• Add to the intake air with the engine running and variable rotational speeds (approx. 2,000 – 3,500 rpm)

PROPERTIES

• Protects the catalytic converter from clogging with soot
• Guarantees optimum combustion
• Cleans the intake tract
• Intake valves and combustion chamber
• Prevents corrosion in the fuel system
• Guarantees low fuel consumption with long-lasting effect

TECHNICAL DATA