HELLA 2VP 340 970-711 Rearlight - LED - 24V

Item Attributes: Mounting Type: mountingFitting Position: right / leftLength: 410 mmHeight: 140 mmWidth: 86 mmWeight: 1900 gSupplementary Article/Info 2: with indicator failure control / with plug / without ballast / Electromagnetic Compatibility (EMC)Light Design: LEDRegistration Type: ECE / ADR/GGVSVoltage: 24 VTemperature range from: -40 °CTemperature range to: 60 °CLight functions: 6Fastening Type: for horizontal fasteningShape: rectangularHousing Colour: BlackHousing material: ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) / PC (Polycarbonate)Lamp Type: LEDLight Function: With Wiping Effect / with stop light (LED) / with reverse light (LED) / with indicator (LED) / with rear fog light (LED) / with reflector / with taillight (LED)Thread Size: M8 x 30Number of connectors: 5Number of pins: 2 -pin connector / 7 -pin connectorConnector type: AMP-superseal / Central 7 poles-DINProt.type (IP Code): IP6K9KQuantity Unit: PieceQuantity: 1Assembly by qualified personnel required!

The full-LED combination rearlight for 24 V trucks and trailers impresses at first glance with its innovative design. Particularly striking is the patented LED light curtain with an area of 144 cm² for the tail light and the rear reflector behind it as well as the dynamic flashing light. Due to the large light area optimum visibility of the vehicle is ensured. This ensures a high level of safety. The combination rearlight is also extremely robust. The lens is bonded to the housing the two-colour outer lens made of polycarbonate (PC) is impact-resistant. With a size of 410 x 140 mm and an installation depth of only 55.5 mm it is also extremely compact. The electronics also meet the highest requirements. The high-power LEDs have a long service life and low power consumption. There are also versions of the light where the control for flashing side marker lights and the load simulation for brake and indicator lights are integrated into the system. This ensures a high level of compatibility. Another plus point of the combination rearlight is its future viability. It has a mechanical interface for sensors so that for example ultrasonic sensors can be connected on both sides.

Combination Rearlight;HELLA;Black;1;AMP-superseal;Indicator Sweeping;Piece;6;IP6K9K;with brake light (LED);with indicator failure control;mounting;Right;ECE;with reverse light (LED);with plug;Central 7 poles-DIN;60°C;without ballast;LED;24V;Left;-40°C;5;with indicator (LED);Rectangular;with rear fog light (LED);2-pin connector;1900g;M8 x 30;Electromagnetic Compatibility (EMC);ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate);7-pin connector;with reflector;LED;140mm;for horizontal fastening;86mm;with taillight (LED);PC (Polycarbonate);410mm;ADR/ GGVS Checked;