HELLA 2VP 340 970-431 Rearlight - LED - 24V

Item Attributes: Mounting Type: mountingFitting Position: leftLength: 586 mmHeight: 180 mmWidth: 86 mmWeight: 1900 gSupplementary Article/Info 2: Electromagnetic Compatibility (EMC) / with indicator failure control / with ballast / with plug / for trailerLight Design: LEDRegistration Type: ADR/GGVS / ECEVoltage: 24 VTemperature range from: -40 °CTemperature range to: 60 °CLight functions: 7Fastening Type: for horizontal fasteningShape: rectangularHousing Colour: BlackHousing material: PC (Polycarbonate) / ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate)Lamp Type: LEDLight Function: with reverse light (LED) / with indicator (LED) / with taillight (LED) / Without Wiping Effect / with reflector (triangular) / with rear fog light (LED) / with marker lamp (LED) / with stop light (LED)Thread Size: M8 x 30Number of connectors: 5Number of pins: 2 -pin connector / 7 -pin connectorConnector type: Central 7 poles-DIN / AMP-supersealProt.type (IP Code): IP6K9Kpaired article number: 2VP 340 970-441Quantity Unit: PieceQuantity: 1Assembly by qualified personnel required!

The full-LED combination rearlight for 24 V trucks and trailers impresses at first glance with its innovative design. Particularly striking is the patented LED light curtain with an area of 144 cm² for the tail light and the rear reflector behind it as well as the dynamic flashing light. Due to the large light area optimum visibility of the vehicle is ensured. This ensures a high level of safety. The combination rearlight is also extremely robust. The lens is bonded to the housing the two-colour outer lens made of polycarbonate (PC) is impact-resistant. With a size of 410 x 140 mm and an installation depth of only 55.5 mm it is also extremely compact. The electronics also meet the highest requirements. The high-power LEDs have a long service life and low power consumption. There are also versions of the light where the control for flashing side marker lights and the load simulation for brake and indicator lights are integrated into the system. This ensures a high level of compatibility. Another plus point of the combination rearlight is its future viability. It has a mechanical interface for sensors so that for example ultrasonic sensors can be connected on both sides.

Combination Rearlight;HELLA;LED;5;586mm;with reverse light (LED);IP6K9K;with indicator (LED);86mm;-40°C;1;2-pin connector;7-pin connector;Electromagnetic Compatibility (EMC);with indicator failure control;with taillight (LED);1900g;ADR/ GGVS Checked;Indicator Blinks;Rectangular;PC (Polycarbonate);with reflex reflector (triangular);2VP 340 970-441;with rear fog light (LED);mounting;with marker lamp (LED);for horizontal fastening;M8 x 30;with ballast;24V;ECE;180mm;Left;60°C;with plug;Piece;LED;Black;Central 7 poles-DIN;with brake light (LED);7;AMP-superseal;for trailer;ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate);