HELLA 1GA 996 288-041 LED-Worklight - Power Beam 1500 - 24/12V

Item Attributes: Mounting Type: mounting / BoltedFastening Type: Swivelling Mounting Bracket / VerticalLight Design: LEDLamp Type: LEDVoltage: 12 V / 24 VHeight: 115 mmWidth: 142 mmDepth: 61 mmLight Distribution: Long-range illuminationRegistration Type: ADR/GGVSFulfils ECE norm.: R10fulfils test standard: RCMPlug: DEUTSCH plugProt.type (IP Code): IP6K7 / IP6K9KLuminous Flux: 1300 lmColour Temperature: 5700 KNumber of LEDs: 6Power consumption: 22 WHousing Type: Aluminium HousingHousing Colour: Black/GreyDiffusing Lens Material: Polyamid 12Diffusing Lens Type: Clear diffusing lensAssembly by qualified personnel required!

The Power Beam 1500 is an ideal LED worklight that combines powerful light output in a practical design. The worklight is designed to be universally applicable due to its compact dimensions. The light of the 6 high-power LEDs is homogeneously distributed in the working area by a specially developed multi-facet reflector. Thanks to its powerful light output the Power Beam 1500 can replace standard halogen worklights (e.g. H3 / 55 watts) - with a power consumption of only 22 watts. This makes the worklight ideal for use on vehicles with battery operation and also where the alternator is already heavily loaded. The spotlight can be operated with either 12 or 24 volts. The integrated electronics are protected against reverse polarity and equipped with an LED fault bypass. This ensures the function of the worklight even in the unlikely event of an LED failure. With a colour temperature of 5700 Kelvin the light of the LED worklight is similar to daylight. This has the effect of distinguishing colours more clearly in the dark making sensory perception much easier for the human eye. Working at night is thus made easier and rapid eye fatigue is prevented. The black housing of this worklight is made of aluminium and has cooling fins. These ensure the necessary heat dissipation of the 6 high-performance LEDs. In addition a temperature sensor protects the worklight from overheating. Only in this way can the long service life of the LEDs be fully exploited. The plastic part at the back acts as a handle to tilt the worklight into the right position.

Worklight;HELLA;Power Beam 1500;61mm;IP6K9K;DEUTSCH plug;;1GA 996 288-041;with overheating protection;115mm;without vibration damper;with holder;129mm;IPX7;LED;with overvoltage protection;ADR/GGVS;22W;24V;Orange;mounting;Aluminium Housing;Black/Grey;100 x 80mm;12V;Clear diffusing lens;Long-range illumination;1300lm;Plastic;6;142mm;Vertical;