Liqui Moly Liquifast 1502 310ml - 6139

1-component, cold-application, moisture-curing PUR adhesive for direct glazing of vehicle windows in the case of repairs. Liquifast 1502 was tested in a crash by the TÜV testing agency. The bonding agent is characterized by its extremely fast hardening properties and excellent rigidity. Vehicles whose windows were bonded using Liquifast 1502 are ready to be driven after just 1;hour of drying time, with or without driver airbag/dual airbags, according to general test conditions. Liquifast 1502's increased torsional rigidity increases driving safety and comfort. This type of adhesive is especially prescribed if the vehicle windows contain heating elements or vehicle antennas.

AREAS OF APPLICATION

• Bonding of windshields, rear windows and side windows to vehicle bodies (cars, trucks, the drivers' cabins of tractors/forklift trucks, and special vehicles)
• Bonding of side windows made from single pane and insulation glass in bus and train car construction
• And the following makes of cars: Audi, BMW, Daimler Chrysler, Ford, Jaguar, Opel, Porsche, Renault, Saab, Seat, Škoda, Volvo, Volkswagen

APPLICATION

• 1
• Cleaner
• The glass surface or the ceramic coating is cleaned with Liquiclean or Cleaner and Thinner, part no. 6130, and finally with Window Cleaner Foam, part no. 1512, as are the bodywork flange or newly painted car-body components
• We recommend also cleaning the remaining adhesive beading that has been trimmed back with Liquiclean or Cleaner and Thinner
• Before applying the sealant or bonding the window, the cleaned bonding surface must be completely dry
• Priming/activation of pre-coated windows
• The Active Primer is included in the scope of delivery of the Window Repair Kit as a 10 ml stick
• Shake Active Primer well for at least 45 seconds before use
• Active Primer can be applied universally in the bonding area thinly and evenly (approx
• 0. 05 mm wet-film thickness) on the cleaned glass surface or ceramic screen printing, on the clean paint surface of newly painted car-body components, on remaining adhesive beadings that have been trimmed back and pre-coated windows (PUR and RIM coatings)
• The primed surface must be allowed to air off for about 15 minutes before applying the Windshield Adhesive

ADDITIONAL INFORMATION

• Adhesive/sealing compound for direct glazing
• The adhesive must be used in conjunction with the corresponding glass cleaner and the corresponding primers
• To be processed when cold
• Drive-away times for standard climate: Without/with driver's airbag: 1 hours; double airbags: 1 hours
• Processing time: 10 min

PROPERTIES

• Tüv tested
• Fast bonding properties
• Cold working
• Proven oem quality
• Cured by moisture in the air
• High-modulus
• High viscosity
• Non-conductive

TECHNICAL DATA